Room conditions
Please protect your cutter from moisture, dust, draughts and direct sunlight (to prevent possible
media detection and epos readout issues). It is best to keep your machine away from open
windows and air-conditioners.
See to it that there is an adequate space around the cutter so that ventilation is not obstructed.
Avoid unnecessary vibrations and set up your cutter on a level surface.
Be sure to have some free space on each side of the SC-Pro to ease the operating of it.
a = at least 1 meter
b = at least 1 meter
c = at least 1 meter
d = at least 0,1 meter
This means that you need the following room space in total: 3,20m x 2,66m (W x D)
d
User's Guide SC-PRO Cutting Plotter
b
c
16
CHAPTER 2 : PRODUCT OVERVIEW
a
AP-75280 – Rev. 1.1