Table of Contents
Advertisement
4.2.5
Max Sheet length
After installation of a sheet and sheet being selected in the menu, the cutting plotter will measure the width
and length of the sheet.
To avoid unrolling a full roll of media when a roll is loaded while the media type is set to sheet, you can
define a maximum allowed sheet length.
In case sheet is selected in the menu, the SC-Pro will not measure more than the length in the Max. Sheet
Length menu, preventing the roll media to be rolled off completely.
Max Sheet length
0 – 2000 - 10000 [mm]
Notes
When there is NO end of roll detection during the sheet measurement, the cutter will automatically
switch to ROLL mode.
M a x S h e e t L e n g t h
2 0 0 0
[ m m ]
S a v e :
E x i t :
The maximum sheet length / maximum feeding will be 2 m.
48
User's Guide SC-PRO Cutting Plotter
CHAPTER 4 : WALKTHROUGH THE OPERATION PANEL
AP-75280 – Rev. 1.1
Advertisement
Table of Contents
