FEATURES OF THE OPTIONAL KNIFEHOLDER
For some applications it might be convenient to be able to very accurately change the depth of the cutting
blade. For those applications, MUTOH can provide you with an optional knife holder, featuring a nonius
(vernier) with which it is possible to adjust the depth of the knife in increments of 0.01 millimetre (0.0004")
The upper scale lines make it possible to change the knife depth over 0.05 mm (0.002").
The lower scale (nonius) makes it possible to change the knife depth over 0.01 mm (0.0004").
CHAPTER 4 : WALKTHROUGH THE OPERATION PANEL
- 0,05 mm
- 0,01 mm
65
User's Guide SC-PRO Cutting Plotter
+ 0,05 mm
+ 0,01 mm
AP-75280 – Rev. 1.1