General Sets; Brushes Sets - Fimap IMx Workshop Manual

General Sets

MENU
General Sets:
Language: ##
General Sets:
Mode: ##
General Sets:
Battery: ##
General Sets:
Rst.Cnthr: ##
5-62
General Sets:
Rst.Main Cnthr: ##

Brushes Sets

Parameter
Brushes Sets:
I Max: ## [Amp]
Brushes Sets:
I Nom: ## [Amp]
Brushes Sets:
T Nom: ## [s]
Brushes Sets:
T Off: #.# [s]
Brushes Sets:
T Reset: ## [s]
Brushes Sets:
T On: #.# [s]
Brushes Sets:
Eco Speed: ## [V]
DEFAULT VALUES
IT IT-EN-FR-SP
IMX-BT IMX B - IMX
BT
GEL GEL-WET-
AGM-GE1-
WE1
N
N
Default Min Max Description
40 20 50 Maximum current from the main card to the brush motor.
25 10 40 Rated current; with T Nom manages the amperometric protection
(alarm + stop brush motor).
30 1 60 Rated timer; with I Nom manages the amperometric protection
(alarm + stop brush motor).
0.0 0.0 10.0 Delay of switching off of the brush motor when the safety lever is
released.
10 0 100 Timing of reset amperometric protection (overcurrent) - NOT USED.
0.2 0.0 5.0 Delay to switching on of the brush motor when the safety lever is
pressed.
17 15 20 Value of Voltage reduction of brush motor, during ECO mode.
DESCRIPTION
Setup the language of the display.
Setup of the machine model (Normal version or with dosing
system).
Setup of the battery type.
Reset partial hourmeter (like on "working menu").
Reset total hourmeter (key, brush, vacuum, traction).