Fimap IMx Workshop Manual page 20

1) The vacuum motor is not powered
properly
3-20
2) (Only
switch doesn't work
3) (Only B-BT) The display shows an
alarm message
4) The vacuum motor carbon brushes
are worn
5) The vacuum motor is supplied but
it doesn't work
The vacuum motor doesn't work properly
BB) The vacuum
Check the power connections on the
vacuum motor.
motor Replace the vacuum motor switch.
Refer to the proper section
5.13.1 at page 54)
Replace the vacuum motor carbon
brushes.
Replace the vacuum motor.
(see section
.