General Sets; Pumps Sets - Fimap MXR Workshop Manual

General Sets

MENU DEFAULT
General Sets:
Language: ##
General Sets:
Mod: ###
General Sets:
Battery: ##
General Sets:
Rst.Cnthr: ##
General Sets:
Rst.Main Cnthr: ##
Brushes Sets
Parameter Default
Brushes Sets: 50
I Max: ## [Amp]
Brushes Sets: 22
I Nom: ## [Amp]
Brushes Sets: 30
T Nom: ## [s]
Brushes Sets: 0.2
T Off: #.# [s]
Brushes Sets: 10
T Reset: ## [s]
Brushes Sets: 0.5
T On: #.# [s]
Brushes Sets: 17
Eco Speed: ## [V]
Brushes Sets: 15
Lev.1: ### [A]
Brushes Sets: 25
Lev.2: ### [A]
Brushes Sets: 35
Lev.3: ### [A]

Pumps Sets

Parameter not managed
VALUES DESCRIPTION
IT IT-EN-FR-SP- Setup the language of the display.
DE
Mxr . . . Setup of the machine model (Normal version or with dosing
system).
GEL GEL-WET- Setup of the battery type.
AGM-GE1-
WE1
N Reset partial hourmeter (like on "working menu").
N Reset total hourmeter (key, brush, vacuum, traction).
Min Max Description
20 80 Maximum current from the main card to the brush motor.
10 40 Rated current; with T Nom manages the amperometric protection
(alarm + stop brush motor).
1 60 Rated timer; with I Nom manages the amperometric protection
(alarm + stop brush motor).
0.0 10.0 Delay of switching off of the brush motor when the safety lever is
released.
0 100 Timing of reset amperometric protection (overcurrent).
0.0 5.0 Delay to switching on of the brush motor when the safety lever is
pressed.
15 20 Value of Voltage reduction of brush motor, during ECO mode.
5 35 Parameter not managed.
5 35 Parameter not managed.
5 35 Parameter not managed.
5-47