Operator Menu; Change A Parameter (In The Operator Menu) - Fimap IMx Workshop Manual

Operator Menu

To enter to the Operator menu go ahead
as follow:
With the machine off, press in the
same time button "3", "4" and "6"
Turn on the key, with the three but-
tons pressed.
5-52
Waiting the upload of the "working
menu"
Release the buttons
To move inside of the menu, press the
button "4" and the button "6".
To modify a parameter or confirm a
changed value, press the button "3".
Change a Parameter (in the Operator
Menu)
To change a parameter proceed as fol-
lows:
Run the menu with the button "4"
or "6" and select the parameter to
change.
Select the submenu to be changed
pressing the button "3"
Utilize the button "4" and "6", to shift
all the available values for the pa-
rameter necessary to modify.
To confirm the new value press the
button "3"
To save the change is necessary to
return to the user menu; to exit from
"working menu" select the menu
"exit"
For example, to modify the language
from EN to IT
Turn OFF the machine
Press in the same time, the buttons
"3", "4" and "6"
Until the buttons are pressed, turn
ON the key and wait the upload of
the "working menu"
Use the buttons "4" or "6" to select
the submenu "language"
To modify the parameters of this
menu, press the button "3". To con-
firm the possibility to change param-
eters, the first line on the display will
blink
Utilize buttons "4" or "6" to shift all
the values on this menu and select
the value "IT"
Confirm the new value by pressing
the button "3"
To save this modification, select
the submenu "exit" and confirm by
pressing button "3".