Removing And Installing Main (Centre) Stand - BMW R 1150 RT Repair Manual

Motorcycle bmw r 1150 rt

Hide thumbs Also See for R 1150 RT:

Table of Contents

Removing and installing main

(centre) stand

Remove side stand.

Secure stand, BMW No. 00 1 520, to motorcycle

with bushes and screws, BMW No. 00 1 529.

Disengage tension springs.

Remove right and left bearing bushings (1).

Remove the main (centre) stand.

Remove right and left bearing blocks (2).

Installation is the reverse of the removal proce-

When installing the springs, make sure that the thick

spring is on the inside and the thin spring on the

outside (arrow).

Lubricant:.................. e.g. Staburags NBU 30 PTM

Chapters

Table of Contents