Installing Crankshaft; Installing Timing Chain Tensioning And Slide Rails; Installing Auxiliary Shaft/Timing Chains - BMW R 1150 RT Repair Manual

2
3

Installing crankshaft

11 21
e
Attention:
Oil the bearings.
Installing timing chain tensioning
11 31
and slide rails
•
Seal pivot pin for tensioner rail/slide rail at clutch
side (arrow) with 3-Bond 1209.
•
Insert pivot screw (1) into chain tensioner rail, us-
ing a new seal.
X
Tightening torque:
Chain rail pivot pin........................................ 18 Nm
11.48
1
Installing auxiliary shaft/timing
11 31
chains
•
When installing the auxiliary shaft (2), ensure that
its dowel pin socket is aligned with the housing
flange on the side toward the crankshaft.
e
Attention:
Timing chains (3) must mesh fully with auxiliary shaft
sprockets.
u
S110080