Removing and installing
36 31 396
wheel bearings
Removing wheel bearings
36 31
•
Carefully lever out the shaft sealing ring with a
screwdriver.
•
Remove driver and retaining ring.
00 8 572
00 8 574
36 6 640
36 5 511
•
Clamp a drift, BMW No. 36 5 511, into the vise and
place the wheel on it with the wide bearing down.
•
Place a spacing ring, BMW No. 36 6 640, be-
tween the wheel hub at the right and the claws of
the internal puller.
•
Heat the bearing seat to approx. 60 °C (140 °F).
•
Pull out the wheel bearing with counter-
support 22/1, BMW No. 00 8 572, and internal
puller 21/3, BMW No. 00 8 574.
•
Remove wheel from drift, BMW No. 36 5 511.
1
2
•
Press out spacing bushing (1) and wheel
bearing (2) with drift, BMW No. 36 5 530.
R28360030
R28360020
36 5 530
RS360023
36.7