Removing And Installing Fuel-Pump Unit - BMW R 1150 RT Repair Manual

6
1
Removing and installing fuel-
16 14
pump unit
e
Attention:
Fuel is flammable and a hazard to health.
Observe all applicable safety regulations.
•
Remove fuel tank ( 16.5).
a
•
Drain fuel tank.
•
Remove fasteners of fuel pump unit (1) and raise
the unit slightly.
•
Disconnect plug (2).
•
Release the hose clips with pliers,
BMW No. 17 5 500, and disconnect hoses.
•
Carefully remove the fuel-pump unit.
Fuel filter removal and installa-
16 12 008
tion
•
Open non-reusable hose clips at fuel filter (3).
e
Attention:
Note correct direction of flow through fuel filter.
•
Remove/install fuel filter.
•
Secure non-reusable hose clips with pliers,
BMW No. 13 1 500.
3
-
+
2
16 12 000
pump
•
Carefully remove strainer (4) from fuel pump.
•
Open non-reusable hose clips at fuel pump (5).
•
Carefully disconnect the hoses from the fuel
pump.
•
Disconnect the electrical connections at the fuel
pump.
•
Remove fuel pump.
•
Installation is the reverse of the removal proce-
dure.
•
Secure non-reusable hose clips with pliers,
BMW No. 13 1 500.
e
Attention:
Make sure O-ring (6) is in perfect condition.
After installing, check fuel pump unit for leaks.
X
Tightening torque:
Fuel pump unit to fuel tank ............................. 5 Nm
5
.
Removing and installing fuel
4
R22160030
16.7