Adjusting valve clearances
11 34 004
•
Set piston to firing TDC on the ignition stroke.
•
Measure valve clearance with feeler gauge.
•
Correct valve clearance with adjusting screw and
tighten locknut.
Valve clearances with engine cold
(max. 35 C/95 F):
Inlet ........................................... 0.15 mm (0.006 in)
Exhaust ..................................... 0.30 mm (0.012 in)
X
Tightening torque:
Locknut .......................................................... 8 Nm
•
Recheck the valve clearances. You should feel
slight resistance as the blade of the feeler gauge
slides between the valve stem and the rocker
arm.
RS110980
11.59