Integral Abs; Reading Fault Memory With Bmw Moditec; Performing Bleed Test With Bmw Moditec - BMW R 1150 RT Repair Manual

•
Install rear brake pads and brake caliper.
•
Hand-tighten cap of rear wheel-circuit reservoir.
•
Check operation of the brake system with the ig-
nition switched on.
e
Attention:
After all the work on the brake system has been
completed, run a bleed test using the
BMW MoDiTeC.
•
Perform bleed test with BMW MoDiTeC.
•
Install fuel tank.
Brake fluid....................................................DOT 4
X
Tightening torque:
Bleed screw in rear brake caliper ................... 5 Nm
Brake caliper to rear wheel drive .................. 40 Nm
34.30

Integral ABS

34 00
Reading fault memory with
BMW MoDiTeC
•
Remove front and rear seats.
•
Connect the BMW MoDiTeC to the diagnosis
connector.
•
Read out the fault memory.
•
Clear the fault memory if applicable, or perform
all requisite repair work.
Integral ABS
34 00
Performing bleed test with
BMW MoDiTeC
•
Remove front and rear seats.
•
Connect the BMW MoDiTeC to the diagnosis
connector.
d
Warning:
When performing maintenance and repair work on
BMW Integral ABS, never pump quickly or
vigorously.
•
Perform bleed test.
•
Perform all requisite repair work.