Draining Control Circuits; Draining Front Control Circuit; Draining Rear Control Circuit - BMW R 1150 RT Repair Manual

Draining control circuits

e
Attention:
Do not allow brake fluid to come into contact with
painted parts of the motorcycle as brake fluid de-
stroys paint.

Draining front control circuit

•
Turn the front wheel to a position in which the
brake fluid reservoir is horizontal and secure the
handlebars in this position.
•
Wrap cloths around the reservoir.
•
Remove front reservoir cap with rubber dia-
phragm.
•
Draw off old brake fluid and clean the reservoir.
•
Draw off the brake fluid from the circuits in the
correct sequence, using ring spanner,
BMW No. 34 2 532:
– front metering cylinder (1),
– front integral circuit (2) and
– front control circuit (3).

Draining rear control circuit

•
Remove rear reservoir cap with rubber dia-
phragm, draw off the old brake fluid and clean
the reservoir.
1
3
•
Draw off the brake fluid from the circuits in the
correct sequence, using ring spanner,
BMW No. 34 2 532:
2
– rear metering cylinder (4),
– rear integral circuit (5) and
– rear control circuit (6).
R28340110
5
6
4
R28340110
34.19