Removing And Installing Clutch Hydraulic Line - BMW R 1150 RT Repair Manual

Removing and installing clutch
21 52
hydraulic line
•
Remove the seat.
•
Remove side panels (
a
e
Attention:
Fuel is flammable and a hazard to health. Observe all
applicable safety regulations.
•
Remove fuel tank ( 16.5).
a
•
Remove screw from intake air pipe.
•
Remove rear silencer.
d
Warning:
Integral ABS When removing and installing the
brake calipers, force back the pistons carefully to
ensure that the wheel-circuit reservoir does not
overflow.
If fluid escapes, proceed in accordance with "In-
structions for filling reservoir" (
•
Remove rear brake caliper.
•
Remove rear wheel.
•
Place support under rear wheel drive.
•
Remove spring strut.
21.8
46.8).
00.44).
a
e
Attention:
Do not allow brake fluid to come into contact with
painted parts of the motorcycle - brake fluid de-
stroys paint.
•
Drain the clutch operating system.
R22210050