Measuring big end bearing play
11 24
•
Measure crankpin with an external micrometer in
the thrust direction and at right angles to the
thrust direction.
•
Install bearing shells and assemble conrods.
•
Using tightening angle indicator,
BMW No. 11 2 500, tighten the big end bolts.
X
Tightening torque:
Big end bolts, oiled
Initial torque ................................................. 20 Nm
Tightening angle............................................... 80 °
11.46
11 2 500
•
•
RS110350
Measure big end bearing with bore gauge in
thrust direction.
Enter measured values on record sheet and cal-
culate big end bearing play (
RS110340
RS110360
11.10).
a