1
Removing and installing main
(centre) stand
•
Remove the sump guard.
00 1 520
•
Secure stand, BMW No. 00 1 520, to motorcycle
with overlength bushes and screws,
BMW No. 00 1 527.
L
Note:
Mount a washer on the screw on the right as viewed
in the forward direction of travel.
Depth of thread in tapped bore has been reduced!
•
Disconnect tension springs.
•
Remove machine screws (1) in bearing
bushings (2).
•
Remove right and left bearing bushings (2).
46.6
2
•
Disconnect the plug from the side stand switch.
•
Remove the main (centre) stand.
•
Remove right and left bearing blocks (2).
•
Installation is the reverse of the removal proce-
dure.
R21110030
L
Note:
When installing the springs, make sure that the thick
spring is on the inside and the thin spring on the
outside (arrow).
Lubricant:
for pivot bushings.............. Staburags NBU 30 PTM
v
243
3
R21460050
R21460140
2
1