X50/Microx Operations When Control Changes Are Transmitted/Received - Korg MICROX X50 Parameter Manual

X50/microX operations when control changes are
transmitted/received
The following table shows the operations that the X50/
microX will perform when control change messages are
CC# Control
0 Bank select (MSB)
1 Modulation 1
2 Modulation 2
4 Foot controller
5 Portamento time
6 Data entry (MSB)
7 Volume
8 Post insertion effect pan
10 Pan
11 Expression
12 Effect control 1
13 Effect control 2
16 Controller (CC#16)
17 Knob modulation 1
18 Controller (CC#18)
19 Knob modulation 2
20 Knob modulation 3
21 Knob modulation 4
32 Bank select (LSB)
38 Data entry (LSB)
64 Damper
65 Portamento On/Off
66 Sostenuto On/Off
67 Soft
70 Sustain level
71 Filter resonance level
High pass filter cutoff frequency
72 Release time
73 Attack time
74 Low pass filter cutoff frequency
75 Decay time
76 LFO1 speed
77 LFO1 depth
78 LFO1 delay
79 Filter EG intensity
80 Panel switch1 On/Off
81 Panel switch2 On/Off
82 Foot switch On/Off
83 Controller (CC#83)
91 Effect depth 1 (send 2 level)
92 Effect depth 2 (insertion effect On/Off)
93 Effect depth 3 (send 1 level)
94 Effect depth 4 (master effect 1 On/Off)
95 Effect depth 5 (master effect 2 On/Off)
96 Data increment
97 Data decrement
98 NRPN(LSB)
99 NRPN (MSB)
100 RPN(LSB)
101 RPN(MSB)
168
Value
0...127 bank select message MSB
0...127 X50: Corresponds to [MOD] wheel movement in the up direction
microX: Corresponds to joystick movement in the +Y (up ) direction
0...127 X50: Used to control Alternate Modulation (corresponds to AMS: JS-Y #02) or Effect
Dynamic Modulation (corresponds to Dmod Src: JS-Y#2)
microX: Corresponds to joystick movement in the -Y direction (down)
0...127 corresponds to when the assignable pedal function is set to Foot Pedal
0...127 portamento time
0...127 MSB of RPN and NRPN data
0...127 volume
0...127 pan after the insertion effect
0...127 pan
0...127 volume
0...127 for controlling Effect Dynamic Modulation (same as Dmod Src: FX1 #12)
0...127 for controlling Effect Dynamic Modulation (same as Dmod Src: EX2 #13)
0...127 for controlling Modulation, Alternate Modulation (same as AMS: Ribbon #16), Effect
Dynamic Modulation (same as Dmod Src Rbn#16)
0...127 corresponds to when Knob Mod.1 is assigned as the B-mode function
of a REALTIME CONTROLS knob
0...127 for controlling Alternate Modulation (same as AMS: Slider #18), Effect Dynamic Modula-
tion (same as Dmod Src: Sld #18)
0...127 corresponds to when Knob Mod.2 is assigned as the B-mode function
of a REALTIME CONTROLS knob
0...127 corresponds to when Knob Mod.3 is assigned as the B-mode function
of a REALTIME CONTROLS knob
0...127 corresponds to when Knob Mod.4 is assigned as the B-mode function
of a REALTIME CONTROLS knob
0...127 LSB of bank select message
0...127 LSB of RPN or NRPN data
0...127 damper effect
0...63(Off), 64...127(On) turn the portamento effect on/off
0...63(Off), 64...127(On) turn the sostenuto effect on/off
0...127 soft pedal effect
0...127 sustain levels of the filter EG and amp EG
0...127 resonance level of the filter
cutoff frequency of the high pass filter
0...127 release times of the filter EG and amp EG
0...127 attack times of the filter EG and amp EG
0...127 cutoff frequency of the low pass filter
0...127 decay times/slope times of the filter EG and amp EG
0...127 LFO1 speed
0...127 pitch LFO1 intensity
0...127 LFO1 delay
0...127 filter EG intensity
0...63(Off), 64...127(On) X50: Corresponds to On/Off when the SW1 function is set to SW1 Mod.
microX: Used to control Alternate Modulation and Effect Dynamic Modulation
0...63(Off), 64...127(On) X50: Corresponds to On/Off when the SW2 function is set to SW2 Mod.
microX: Used to control Alternate Modulation and Effect Dynamic Modulation
0...63(Off), 64...127(On) corresponds to on/off when the function of the assignable foot switch is set to Foot SW
0...127 for controlling Alternate Modulation (same as AMS: MIDI CC#8), Effect Dynamic Modulation
(same as Dmod Src: CC#83)
0...127 send 2 level
0(Off), 1...127(On) turn insertion effect on/off
0...127 send 1 level
0(Off), 1...127(On) master effect 1 on/off
0(Off), 1...127(On) master effect 2 on/off
0
0
2 corresponds to the arpeggiator on/off switch
10 corresponds to the arpeggiator Gate control knob
11 corresponds to the arpeggiator Velocity control knob
0 MSB of NRPN
0 select the pitch bend range
1 select Fine Tune
2 select Coarse Tune
0 MSB of RPN
received, and the relation between settings and controller
movements on this instrument
Function
*1
*2
*2
*1
*3
*4
*3
*3
*3
*3
*3
*3
*3
*3
*3
*5
*5
*5
*6
*6
*6
*1
*1
*1