Korg MICROX X50 Parameter Manual Page 78

Music synthesizer and synthesizer/controller.
Hide thumbs
7–6: Controls
When you operate these controllers on the MIDI chan-
nel of the "Control Track," the MIDI messages assigned
here will be transmitted (if "Status" 2–1a/2a is EXT,
EX2, or BTH).
X50
7–6a
microX
7–6a
7–6a: Knob B Assign
Here you can set the B-mode functions (mainly various con-
trol changes) that the REALTIME CONTROLS knobs [1]–[4]
will have (☞p.162 "Realtime Control Knobs B Assign List").
When the REALTIME CONTROLS are in B-mode, the func-
tions you specify here will be controlled on the track and
MIDI channel of the "Control Track" (0–1a) when you oper-
ate knobs [1]–[4].
The functions you specify here will operate when you rotate
the REALTIME CONTROLS knobs [1]–[4] in B-mode.
Knob1–B (Knob1–B Assign)
Knob2–B (Knob2–B Assign)
Knob3–B (Knob3–B Assign)
Knob4–B (Knob4–B Assign)
7–6b
[Off...MIDI CC#95]
[Off...MIDI CC#95]
[Off...MIDI CC#95]
[Off...MIDI CC#95]
X50:
7–6b: SW1/2 Assign
Assigns functions to [SW1] and [SW2] (☞p.161 "SW1, SW2
Assign List").
Since the [SW1] and [SW2] function assignments of the pro-
gram assigned to each track are ignored when the program
is used in a multi, you must make new assignments here for
the multi.
SW1 (SW1 Assign)
[Off...Pitch Bend Lock]
SW1 Mode
SW2 (SW2 Assign)
[Off...Pitch Bend Lock]
SW2 Mode
☞PROG 7–3b
■ 7–6: UTILITY
☞"Write Multi," "Copy From Combi" (0–1)
[Toggle, Momentary]
[Toggle, Momentary]
71

Advertising

   Also See for Korg MICROX X50

   Related Manuals for Korg MICROX X50

This manual also for:

Micro x

Comments to this Manuals

Symbols: 0
Latest comments: