Foot Pedal Assign
You can assign the function that will be controlled by an
assignable pedal (separately sold Korg XVP-10 or EXP-2
option) connected to the ASSIGNABLE PEDAL jack.
• This setting is made in GLOBAL 0: System Foot page
"Foot Pedal Assign" (0–3a).
If you select a function that includes a CC#, that MIDI
control change message will be transmitted each time
the pedal is operated. (min: 0, max: 127)
Foot Pedal Assign List
Off
Master Volume
Foot Pedal (CC#04)
Portamento Time (CC#05)
Volume (CC#07)
Post IFX Pan (CC#08)
Pan (CC#10)
Expression (CC#11)
FX Control 1 (CC#12)
FX Control 2 (CC#13)
MFX Send 1 (CC#93)
MFX Send 2 (CC#91)
X50: Mod.Wheel (CC#01)/microX: JS+Y
(CC#01)
JS–Y (CC#02)
After Touch
Knob 1...4
Even if you set "Foot Pedal Assign" to Knob1...4, you
cannot use a connected foot switch to control the REAL-
TIME CONTROLS C-mode arpeggiator effect. Nor will
it transmit MIDI control messages.
The connected pedal will not function.
Control the volume. Simultaneously, the universal exclusive message Master Volume [F0H, 7FH,
nn, 04, 01, vv, mm, F7H] will be transmitted to control the volume of all timbres or tracks (while pre-
serving the volume balance between timbres or tracks).
Alternate Modulation or Effect Dynamic Modulation can be controlled. To control these, set "AMS"
to Pedal #04 or "Dmod Src" to Pdl#04.
Control the speed at which portamento will change the pitch.
Control the volume of a Program, of a timbre in a Combination, or of a track in Multi mode.
Control the pan after passing through the insertion effect.
Control the pan of a Program, of a timbre in a Combination, or of a track in Multi mode.
Control the volume of a Program, of a timbre in a Combination, or of a track in Multi mode. Expres-
sion is multiplied with the Volume value to determine the actual volume level.
Control Effect Dynamic Modulation. To control this, set Dmod Src to FX1#12.
Control Effect Dynamic Modulation. To control this, set Dmod Src to FX2#13.
Control the send level to master effect 1 (MFX1) from a Program, a timbre in a Combination, or a
track in Multi mode. Simultaneously, this will also control the send level to master effect 1 (MFX1)
from after the insertion effect of the matching MIDI channel.
Control the send level to master effect 2 (MFX2) from a Program, a timbre in a Combination, or a
track in Multi mode. Simultaneously, this will also control the send level to master effect 2 (MFX2)
from after the insertion effect of the matching MIDI channel.
X50: The pedal will control the effect of the "up" direction of the [MOD] wheel.
microX: The pedal will control the effect of the +Y (up) direction of the joystick.
X50: The pedal will control Alternate Modulation or Effect Dynamic Modulation. To control these,
choose JS–Y#2 for "AMS," or JS–Y#2 for "Dmod Src."
microX: The pedal will control the effect of the –Y (down) direction of the joystick.
The pedal will control aftertouch.
Pedal operation will control the effect of REALTIME CONTROLS knobs [1]–[4].
165