Korg MICROX X50 Parameter Manual: Knob 1...4 B Assign; Realtime Control Knobs B Assign List

Music synthesizer and synthesizer/controller.
Hide thumbs

Knob 1...4 B Assign

The following functions can be assigned to the REALTIME
CONTROLS [1]–[4] knobs in B-mode.
• For program, combination, or multi set, make these
settings in 7: Ed–Arp/Ctrls page "Knob B Assign."
This can be set for each program in Program mode,
each combination in Combination mode, and each
multi set in Multi mode.
Realtime Control Knobs B Assign List
Off
Knob Mod. 1 (CC#17)
Knob Mod. 2 (CC#19)
Knob Mod. 3 (CC#20)
Knob Mod. 4 (CC#21)
Master Volume
Porta. Time (CC#05)
Volume (CC#07)
IFX Pan (CC#08)
Pan (CC#10)
Expression (CC#11)
FX Ctrl 1 (CC#12)
FX Ctrl 2 (CC#13)
Flt Cutoff (CC#74)
Flt Reso. (CC#71)
Flt EG Int. (CC#79)
F/A Attack (CC#73)
F/A Decay (CC#75)
F/A Sus. (CC#70)
F/A Rel. (CC#72)
P LFO1 Spd (CC#76)
P LFO1 Dep (CC#77)
P LFO1 Dly (CC#78)
SW 1 Mod. (CC#80)
SW 2 Mod. (CC#81)
Foot SW (CC#82)
MIDI CC#83 (CC#83)
MFX Send 1 (CC#93)
MFX Send 2 (CC#91)
MIDI CC#00...CC#95
162
No function
General purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this,
select KnobM1#17 for "AMS," or Kb1#17 for "Dmod Src." Simultaneously, CC#17 will be transmitted.
General purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this,
select KnobM2#19 for "AMS," or Kb2#19 for "Dmod Src." Simultaneously, CC#19 will be transmitted.
General purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this,
select KnobM3#20 for "AMS," or Kb3#20 for "Dmod Src." Simultaneously, CC#20 will be transmitted.
General purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this,
select KnobM4#21 for "AMS," or Kb4#21 for "Dmod Src." Simultaneously, CC#21 will be transmitted.
Control the volume. Simultaneously, the universal system exclusive message Master Volume [F0H, 7FH, nn, 04,
01, vv, mm, F7H] will be transmitted to adjust the volume of all tracks or timbres (while preserving the volume bal-
ance between tracks or timbres).
Control the portamento time. Simultaneously, CC#5 will be transmitted.
Control the volume. Simultaneously, CC#7 will be transmitted.
Control the panning after the insertion effect. Simultaneously, CC#8 will be transmitted.
Control the oscillator panning. Simultaneously, CC#10 will be transmitted.
Control the expression. Simultaneously, CC#11 will be transmitted.
Control Effect Dynamic Modulation. When controlling this, set "Dmod Src" to FX1#12. Simultaneously, CC#12 will
be transmitted.
Control Effect Dynamic Modulation. When controlling this, set "Dmod Src" to FX2#13. Simultaneously, CC#13 will
be transmitted.
Control the cutoff frequency of the Filter (low pass filter). Simultaneously, CC#74 will be transmitted.
Control the resonance of the Filter, or the cutoff frequency of the high pass filter. If the program's "Type (Filter1/2
Type)" is Low Pass Resonance, the resonance level will be controlled. If it is Low Pass & High Pass, the cutoff
frequency of the high pass filter will be controlled. Simultaneously, CC#71 will be transmitted.
Control the EG intensity of the Filter. Simultaneously, CC#79 will be transmitted.
Control the EG attack of the Filter and Amplifier. Simultaneously, CC#73 will be transmitted.
Control the EG decay time and slope time of the Filter and Amplifier. Simultaneously, CC#75 will be transmitted.
Control the EG sustain level of the Filter and Amplifier. Simultaneously, CC#70 will be transmitted.
Control the EG release time of the Filter and Amplifier. Simultaneously, CC#72 will be transmitted.
Control the frequency of LFO1. Simultaneously, CC#76 will be transmitted.
Control the LFO1 intensity of the pitch. Simultaneously, CC#77 will be transmitted.
Control the delay of LFO1. Simultaneously, CC#78 will be transmitted.
General-purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To control
these, set "AMS" or "Dmod Src" to SW 1 #80. Simultaneously, CC#80 will be transmitted.
General-purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To control
these, set "AMS" or "Dmod Src" to SW 2 #81. Simultaneously, CC#81 will be transmitted.
General-purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this,
select FootSW#82 for "AMS," or FSW#82 for "Dmod Src." Simultaneously, CC#82 will be transmitted.
General-purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this,
select MIDI CC#83 for "AMS," or CC#83 for "Dmod Src." Simultaneously, CC#83 will be transmitted.
Control the send level to Master Effect1. Simultaneously, CC#93 will be transmitted.
Control the send level to Master Effect2. Simultaneously, CC#91 will be transmitted.
The specified MIDI control change (CC#) will be transmitted. If this instrument is set so as to be controlled by the
control change message, the corresponding control will occur.

Advertising

   Also See for Korg MICROX X50

   Related Manuals for Korg MICROX X50

This manual also for:

Micro x

Comments to this Manuals

Symbols: 0
Latest comments: