Korg MICROX X50 Parameter Manual Page 55

Music synthesizer and synthesizer/controller.
Hide thumbs
In this case, the arpeggiator can be triggered (operated)
by any MIDI channel specified for the "MIDI Channel"
parameter of any timbre 1–8 assigned to arpeggiator A
or B.
If Local Control ("Local Control On," GLOBAL 1–1a) is
Off, the keyboard will not trigger the arpeggiator. The
arpeggiator will be triggered via MIDI IN. Turn Local
Control OFF if you have recorded only the trigger notes
on an external sequencer, and wish to playback the
external sequencer to trigger the X50/microX's arpeg-
giator.
If you want the note data generated by the arpeggiator
to be recorded on the external sequencer, turn the X50/
microX's Local Control ON, and turn off the echo back
function on your external sequencer.
You can control the arpeggiator from an external
sequencer, or use an external sequencer to record arpeg-
gio note data. (☞p.178)
Example 1)
Set the "MIDI Channel" (2–1a) of timbres 1 and 2 to Gch,
and set "Status" (2–1a) to INT. Assign arpeggiator A to
timbre 1 and arpeggiator B to timbre 2, and check
"Arpeggiator Run A, B" (0–4a/5a, 7–1a).
• When the front panel [ARP ON/OFF] button is off,
timbres 1 and 2 will sound simultaneously (layered)
when you play the keyboard.
• When the front panel [ARP ON/OFF] button is turned
on, timbre 1 will be played by arpeggiator A, and timbre
2 will be played by arpeggiator B.
Trigger
Arpeggiator
Pattern - A
= Gch
A
Arpeggiator
Trigger
B
Pattern - B
= Gch
Example 2)
The "MIDI Channel" (2–1a) of timbres 1, 2, 3, 4, and 5 are
set respectively to Gch, Gch, 02, Gch, and 03. Their "Sta-
tus" (2–1a) is set respectively to INT, Off, INT, Off, and
INT. Assign arpeggiator A to timbres 2 and 3, assign
arpeggiator B to timbres 4 and 5, and check "Arpeggiator
Run A, B" (0–4a/5a, 7–1a).
• When the front panel [ARP ON/OFF] button is off,
playing the keyboard will sound only timbre 1. (Timbres
2 and 4 are receiving the Gch, but they will not sound
since their "Status" is Off.)
• When you turn on the front panel [ARP ON/OFF]
button, arpeggiator A will operate for timbres 2 and 3,
and arpeggiator B will operate independently for
timbres 4 and 5. (Arpeggiators A and B are triggered by
receiving note data on any MIDI channel of an assigned
timbre, but in this example they are being triggered from
the Gch.)
When you play the keyboard, arpeggiator A will operate
for timbres 2 and 3, but only timbre 3 whose "Status" is
INT will sound. Similarly, arpeggiator B will operate for
timbres 4 and 5, but only timbre 5 whose "Status" is INT
will sound.
In this way, you can make settings so that a timbre does
not sound when the arpeggiator is off, but sounds only
when the arpeggiator is on.
Arpeggiator
Pattern - A
Trigger
= Gch, Ch2
A
Arpeggiator
Pattern - B
Trigger
B
= Gch, Ch3
48
Arpeggiator
Assign
A
Timbre 1
MIDI Ch=Gch Status=INT
B
Timbre 2
MIDI Ch=Gch Status=INT
Arpeggiator
Assign
Off
Timbre 1
MIDI Ch=Gch Status=INT
A
Timbre 2
MIDI Ch=Gch Status=Off
A
Timbre 3
MIDI Ch=2ch
Status=INT
B
Timbre 4
MIDI Ch=Gch Status=Off
B
Timbre 5
MIDI Ch=3ch
Status=INT
■ 7–1: UTILITY
☞"Write Combination," "Solo Selected Timbre" (0–1)
Copy Arpeggiator
This command copies arpeggiator settings.
1 Select "Copy Arpeggiator" to access the dialog box.
2 In "From" select the copy source (mode, bank, number)
arpeggiator.
If you are copying from Combination, or Multi, select
either A or B to if you wish to copy settings from only
one arpeggiator, or select A&B if you wish to copy the
settings of both arpeggiators.
3 If you are copying from a Program, or are copying either
A or B from Combination, or Multi set, select either A or
B as the "To" copy destination.
4 To execute the Copy Arpeggiator command, press the
[MENU/OK] button. To cancel, press the [EXIT/CAN-
CEL] button.
7–2: Arp. A
Pattern - A
Pattern - B
7–3: Arp. B
The Arp. A pages you make settings for arpeggiator A. The
Arp. B pages you make settings for arpeggiator B.
You can also use Utility "Copy Arpeggiator" (7–1) to
copy settings from another mode such as Program
mode.
7–2a
7–2(3)a: Arpeggiator-A(B) Setup
Pattern*
Octave*
Reso (Resolution)*
Gate
Velocity
Swing
Sort*
Latch*
Sounded by normal
Key Sync.*
keyboard playing
Does not sound
Keyboard*
Pattern - A
Does not sound
These parameters are the arpeggiator A settings for the com-
Pattern - B
bination.
(Arpeggiator A)
(Arpeggiator B)
[Preset-0...Preset-4, U000...U250]
[
,
,
[000...100%, Step]
[001...127, Key, Step]
[–100...+100%]
7–2b
[1, 2, 3, 4]
,
,
, ]
[Off, On]
[Off, On]
[Off, On]
[Off, On]

Advertising

   Also See for Korg MICROX X50

   Related Manuals for Korg MICROX X50

This manual also for:

Micro x

Comments to this Manuals

Symbols: 0
Latest comments: