Pitch/Phase Mod; 16: St.chorus (Stereo Chorus); 17: St.harmniccho; (Stereo Harmonic Chorus) - Korg MICROX X50 Parameter Manual

Pitch/Phase Mod.

Pitch/phase modulation effects
16: St.Chorus
(Stereo Chorus)
This effect adds thickness and warmth to the sound by modu-
lating the delay time of the input signal. You can add spread
to the sound by offsetting the phase of the left and right LFOs
from each other.
Stereo In - Stereo Out
Left
LEQ HEQ
EQ Trim
LEQ HEQ
EQ Trim
Right
LFO: Tri / Sine
LFO Wave (LFO Waveform)
a
Selects LFO Waveform
LFO Phase
b
Sets the LFO phase difference between the left and right
Freq (LFO Frequency)
Sets the LFO speed
(Source)
c
Selects the modulation source of LFO speed
(Amount)
Sets the modulation amount of LFO speed
BPM/MIDI Sync
Switches between using the frequency of the LFO speed and using
the tempo and notes
BPM
Selects MIDI Clock and assigns tempo
d
Base (Base Note)
Selects the type of notes that specify the LFO speed
Times
Sets the number of notes that specify the LFO speed
L Dly (L Pre Delay)
Sets the delay time for the left channel
e
R Dly (R Pre Delay)
Sets the delay time for the right channel
Depth
Sets the depth of LFO modulation
(Source)
f
Selects the modulation source of the LFO modulation depth
(Amount)
Sets the modulation amount of the LFO modulation depth
Pre EQ Trim
g
Sets the EQ input level
LoEQ (Pre Low EQ Gain)
Sets the gain of Low EQ
h
HiEQ (Pre High EQ Gain)
Sets the gain of High EQ
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
i (Source)
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
e: L Dly, e: R Dly
Setting the left and right delay time individually allows you to
control the stereo image.

17: St.HarmnicCho

This effect applies chorus only to higher frequencies. This can
be used to apply a chorus effect to a bass sound without mak-
ing the sound thinner. You can also use this chorus block with
feedback as a flanger.
Wet / Dry
Chorus
Chorus
Wet / Dry
LFO Phase
Triangle, Sine
–180...+180deg
☞ Fx:10
0.02...20.00Hz
☞ Fx:09,
Off...Tempo
–20.00...+20.00Hz
Off, On
☞ Fx:09,
MIDI, 40...240
☞ Fx:09
☞ Fx:09
1...16
☞ Fx:09
0.0...50.0ms
☞
0.0...50.0ms
☞
0...100
Off...Tempo
–100...+100
0...100
–15.0...+15.0dB
–15.0...+15.0dB
–Wet...–1:99, Dry, 1:99...Wet
☞ Fx:10,
Off...Tempo
–100...+100
e: Hi/Lo Split
This parameter sets the frequency that splits the high and low
range. Only the high range will be sent to the chorus block.

(Stereo Harmonic Chorus)

Stereo In - Stereo Out
Left
Chorus/Flanger
High/Low Split Point
Feedback
Chorus/Flanger
Right
LFO Phase
LFO: Tri / Sine
LFO Wave (LFO Waveform)
a
Selects LFO Waveform
LFO Phase
b
Sets the LFO phase difference between the left and right
Freq (LFO Frequency)
Sets the LFO speed
(Source)
c
Selects the modulation source of LFO speed
(Amount)
Sets the modulation amount of LFO speed
BPM/MIDI Sync
Switches between using the frequency of the LFO speed and using
the tempo and notes
BPM
Selects MIDI Clock and assigns tempo
d
Base (Base Note)
Selects the type of notes that specify the LFO speed
Times
Sets the number of notes that specify the LFO speed
Dly (Delay Time)
Sets the delay time from the original sound
e
Hi/Lo Split (High/Low Split Point)
Sets the frequency split point between the high and low range
Depth
Sets the depth of LFO modulation
(Source)
f
Selects the modulation source of the LFO modulation depth
(Amount)
Sets the modulation amount of the LFO modulation depth
Feedback
Sets the feed back amount of the chorus block
g
HiDamp (High Damp)
Sets the high range damping amount of the chorus block
Lo Level (Low Level)
Sets the low range output level
h
Hi Level (High Level)
Sets the high range (chorus) output level
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
(Source)
i
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
Low Level Wet / Dry
High Level
High Damp
High Damp
High Level
Low Level
Wet / Dry
Triangle, Sine
–180...+180deg
☞ Fx:10
0.02...20.00Hz
☞ Fx:09,
Off...Tempo
–20.00...+20.00Hz
Off, On
☞ Fx:09,
MIDI, 40...240
☞ Fx:09
☞ Fx:09
1...16
☞ Fx:09
0.0...50.0ms
1...100
☞
0...100
Off...Tempo
–100...+100
–100...+100
☞
0...100%
0...100
0...100
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
113