7-2: Zone (Scan Zone); 7-3: Controls - Korg MICROX X50 Parameter Manual

Music synthesizer and synthesizer/controller
Hide thumbs Also See for MICROX X50:
Table of Contents

Advertisement

7–2: Zone
(Scan Zone)
7–2a
7–2a: Scan Zone
Zone Map
This shows the "Scan Zone" setting.
Key:
Btm (Bottom Key)
Top (Top Key)
These parameters specify the range of notes (keys) for which
the arpeggiator will function. "Top" is the upper limit, and
"Btm" is the lower limit.
Vel:
Btm (Bottom Velocity)
Top (Top Velocity)
Specifies the range of velocities for which the arpeggiator
will function. "Top" is the upper limit, and "Btm" is the
lower limit.
X50:
The note number and velocity can also be specified by
holding down the [ENTER] button and pressing a note on
the keyboard.
■ 7–2: UTILITY
☞"Write Program" (0–1), "Copy Arpeggiator" (7–1)
7–3: Controls
X50
7–3a
microX
7–3a
[C–1...G9]
[C–1...G9]
[001...127]
[001...127]
7–3b
7–3a: Knob B Assign
Here you can assign functions (mainly various types of con-
trol change) to the B-mode of the REALTIME CONTROLS
knobs [1]–[4] (☞p.162 "Realtime Control Knobs B Assign
List").
The functions you set here will take effect when you operate
the REALTIME CONTROLS knobs [1]–[4] in B-mode.
Knob1–B (Knob1–B Assign)
Knob2–B (Knob2–B Assign)
Knob3–B (Knob3–B Assign)
Knob4–B (Knob4–B Assign)
X50:
7–3b: SW1/2 Assign
These settings assign functions to [SW1] and [SW2] (☞p.161
"SW1, SW2 Assign List").
SW1 Assign
[Off...Pitch Bend Lock]
Here you can assign a function to [SW1].
The on/off status of the switch is saved when the program is
written. When you change the function, it will be reset to the
"off" state.
SW1 Mode
Specifies the on/off behavior of [SW1].
Toggle: The switch will alternate on/off each time you press
[SW1].
Momentary: The switch will be on only while you continue
holding [SW1].
SW2 Assign
[Off...Pitch Bend Lock]
SW2 Mode
Here you can assign a function to [SW2].
The functions that can be assigned to [SW2] are the same as
for [SW1], with the exception of SW2 Mod. (CC#81) instead
of SW1 Mod. (CC#80).
■ 7–3: UTILITY
☞"Write Program" (0–1)
[Off...MIDI CC#95]
[Off...MIDI CC#95]
[Off...MIDI CC#95]
[Off...MIDI CC#95]
[Toggle, Momentary]
[Toggle, Momentary]
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Micro x

Table of Contents