Korg MICROX X50 Parameter Manual: Master Eq; Individual Outputs

Music synthesizer and synthesizer/controller.
Hide thumbs

Master EQ

The Master EQ (stereo, three-band EQ) is located right
before (MAIN OUTPUT) L/MONO, R. Low and High EQs
are of the shelving type, and Mid EQ is a peaking type
equalizer. You can control the Low Gain and High Gain
parameters using the Dynamic Modulation function.
The Master EQ (stereo, three-band EQ) is applied to the sig-
nal input from the L/R bus. For more information on the
parameters, p.149.
Program mode
Effect / Mixer Block Diagram in Program Mode
IFX / Indiv.Out
Pan
BUS Select
Oscillator 1
BUS Select
= IFX
Oscillator 2
Select from:
L/R
IFX
1
2
1/2
Off
Combination, Multi mode
Effect / Mixer Block Diagram in Combination / Multi Mode
IFX / Indiv.Out
Pan
BUS Select
BUS Select
Timbre / Track 1
= L/R
BUS Select
Timbre / Track 2
= IFX
BUS Select
Timbre / Track 3
= 1
BUS Select
Timbre / Track 4
= Off
BUS Select
Timbre / Track 8
= 1/2
BUS Select
Track 16
= 2
Select from:
(DKIT)
L/R
IFX
1
2
1/2
Off
PROG 8: Insert Effect
Post IFX
Insert Effect
Pan(CC#8)
BUS Select
stereo
BUS Select
IFX BUS
IFX
= L/R
Select from:
L/R
1
2
1/2
Off
mono x 2
COMBI/MULTI 8: Insert Effect
Post IFX
Insert Effect
Pan(CC#8)
BUS Select
stereo
BUS Select
IFX
IFX BUS
= L/R
Select from:
L/R
1
2
1/2
Off
mono x 2
Individual Outputs
The X50/microX is equipped with two individual INDIVID-
UAL OUTPUT.
You can route the oscillator (Program), timbre (Combina-
tion), and track (Multi) output or the post-IFX signals to
these two individual outputs.
Use "BUS Select" (8–1a) in Program, Combination, or Multi
mode to route the oscillators (Program), timbres (Combina-
tion), or tracks (Multi) to INDIVIDUAL OUTPUT.
If you are using the Insert Effects, use "BUS Select" of the 8:
Ed–InsertFX (or InsertFX), and Setup page to route the post-
IFX signals.
1, 2: Monaural signals are routed to INDIVIDUAL OUTPUT.
1/2: Stereo signals are routed to INDIVIDUAL OUTPUT.
PROG 9: Master Effect
Send1
Send2
L/R BUS
Post IFX
Send1 / 2
Chain
Master Effects
Return1 / 2
MFX1
mono
stereo
MFX2
mono
stereo
mono x2
COMBI/MULTI 9: Master Effect
Send1
Send2
L/R BUS
stereo
Post IFX
Send1 / 2
Chain
Master Effects
Return1 / 2
MFX1
mono
stereo
MFX2
mono
stereo
mono x 2
(MAIN OUTPUT)
Master EQ
L/MONO, R
(INDIVIDUAL
OUTPUT) 1/2
(MAIN OUTPUT)
Master EQ
L/MONO, R
(INDIVIDUAL
OUTPUT) 1/2
103

Advertising

   Also See for Korg MICROX X50

   Related Manuals for Korg MICROX X50

This manual also for:

Micro x

Comments to this Manuals

Symbols: 0
Latest comments: