Reverb; 52: Rev Hall (Reverb Hall); 53: Rev Smth. Hall (Reverb Smooth Hall); 54: Rev Wet Plate (Reverb Wet Plate) - Korg MICROX X50 Parameter Manual

InLvl Mod (Input Level Mod [%])
Sets the modulation amount of the input level
h
Src (Source)
Selects the modulation source for the input level
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
(Source)
i
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
a: BPM, a: Rhythm
With the tempo specified by the "BPM" parameter (or the MIDI
Clock tempo if "BPM" is set to MIDI), the length of one beat
equals the feedback delay time, and the interval between taps
becomes equal. Selecting a rhythm will automatically turn the tap
outputs on and off. When "BPM" is set to MIDI, the lower limit of
the "BPM" is 44.

Reverb

–100...+100
☞ Fx:37,
Off...Tempo
☞ Fx:37
Reverb effects
Dry, 1:99...99:1, Wet
These effects simulate the ambience of reverberation in con-
Off...Tempo
cert halls.
–100...+100
52: Rev Hall
This hall-type reverb simulates the reverberation of mid-size
concert halls or ensemble halls.
53: Rev Smth. Hall
(Reverb Smooth Hall)
This hall-type reverb simulates the reverberation of larger
halls and stadiums, and creates a smooth release.
54: Rev Wet Plate
This plate reverb simulates warm (dense) reverberation.
55: Rev Dry Plate
This plate reverb simulates dry (light) reverberation.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
Right
Reverb Time
a
Sets the reverberation time
High Damp
b
Sets the damping amount in the high range
Pre Delay
c
Sets the delay time from the dry sound
Pre Delay Thru
d
Sets the mix ratio of non-delay sound
Pre EQ Trim
e
Sets the EQ input level
LoEQ (Pre Low EQ Gain)
Sets the gain of Low EQ
f
HiEQ (Pre High EQ Gain)
Sets the gain of High EQ
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
(Source)
g
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
c: Pre Delay, d: Pre Delay Thru
The "Pre Delay" sets the delay time to the reverb input, allowing
you to control spaciousness.
(Reverb Hall)
(Reverb Wet Plate)
(Reverb Dry Plate)
Pre Delay Thru
EQ Trim
LEQ HEQ
+
Reverb
Pre Delay
EQ Trim
Wet / Dry
Wet / Dry
0.1...10.0s
0...100%
0...200ms
☞
0...100%
☞
0...100
–15...+15dB
–15...+15dB
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
133