0-2: Prog - Korg MICROX X50 Parameter Manual

Music synthesizer and synthesizer/controller
Hide thumbs Also See for MICROX X50:
Table of Contents

Advertisement

GM Initialize
This command transmits a GM System On message to Multi
mode, resetting all tracks to the GM settings (refer to the
table below).
In Multi mode when a GM System On message is
received from an external device or the tone generator
will be reset to the GM settings in the same way as
when this command is executed (However even in
these cases, the parameters of the 9: MasterFX will not
be reset).
Rename Track
Selects "Rename Track," access the dialog box and rename
the selected multi. Up to sixteen characters can be input.
(☞OG
X50:
p.112,
microX:
p.114)
GM Initialize Parameters
Parameter
0
Program Select
Pan
Volume
2
Status
Use Program's Scale
7
Arpeggiator Assign
Other Arpeggiator parameters
8
IFX/Indiv.Out BUS Select
Send1(MFX1)
Send2(MFX2)
IFX1–5
Pan(CC#8)
BUS Select
Send1
Send2
Other Insert Effect parameters
9
MFX1
MFX2
Return1
Return2
Other Master Effect and Master EQ parameters
0–2: Prog..8
0–3: Prog..16
Indicates the program that will be used by each track.
0–2a
0–2b
0–2c
0–2(3)a: Track Number & Category
Track Number & Category
This shows the track number and the abbreviated name of
the program category.
0–2(3)b: Program Select
Program Select
X50:
[A...D 000...127, G...g 001...128: name]
microX:
[A...E 000...127, G...g 001...128: name]
In this area you can select the program that will be used by
each track. The lower line shows part of the name of the pro-
gram assigned to the track. For GM2 variation banks or the
GM2 drums bank, the variation bank (1)–(9) or drums bank
(d) will be shown.
Choose this parameter, and use one of the following meth-
ods to select a program.
X50:
• Turn the [VALUE] dial.
• Use the [INC][DEC] buttons.
• Use the numeric buttons [0]–[9] to enter the program
number, and press the [ENTER] button to confirm.
Track1–9, 11–16
G001:Acoustic Piano
g(d)001:STANDARD Kit
C064
C064
100
100
L/R
DKit
0
0
40
40
(Track Program T01...08)
(Track Program T09...16)
Track10
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
The setting remains unchanged
16: St. Chorus
53: Rev Smth. Hall
127
050
Default settings
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Micro x

Table of Contents