39: Pitchshft Mod; (Pitch Shift Modulation); 40: Rotary Sp (Rotary Speaker) - Korg MICROX X50 Parameter Manual

Music synthesizer and synthesizer/controller
Hide thumbs Also See for MICROX X50:
Table of Contents

Advertisement

39: PitchShft Mod

(Pitch Shift Modulation)

This effect modulates the detuned pitch shift amount using an
LFO, adding a clear spread and width to the sound by pan-
ning the effect sound and dry sound to the left and right. This
is especially effective when the effect sound and dry sound
output from stereo speakers are mixed.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
+
Right
LFO: Tri / Sqr
Pitch Shift
a
Sets the pitch difference from the input signal
LFO Wave (LFO Waveform)
b
Selects LFO Waveform
Freq (LFO Frequency)
Sets the LFO speed
(Source)
c
Selects the modulation source of LFO speed
(Amount)
Sets the modulation amount of LFO speed
BPM/MIDI Sync
Switches between using the frequency of the LFO speed and using
the tempo and notes
BPM
Selects MIDI Clock and assigns tempo
d
Base (Base Note)
Selects the type of notes that specify the LFO speed
Times
Sets the number of notes that specify the LFO speed
Depth
Sets the LFO modulation depth for pitch shift amount
(Source)
e
Selects the modulation source of the depth of modulation
(Amount)
Sets the modulation amount of the depth of modulation
Pan
f
Sets the panning effect sound and dry sound separately
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
(Source)
g
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
a: Pitch Shift [cent], e: Depth
These parameters set the amount of pitch shift and amount of
modulation by means of the LFO.
Pitch
Original Pitch
f: Pan, g: W/D
The Pan parameter pans the effect sound and dry sound to the left
and right. With L, the effect sound is panned left, and the dry
sound is panned right. With a W/D = Wet setting, the effect and
dry sound will be output in a proportion of 1:1.
126
Pitch Shifter
Pan
–100...+100cent
Triangle, Square
0.02...20.00Hz
☞ Fx:09,
Off...Tempo
–20.00...+20.00Hz
☞ Fx:09,
MIDI, 40...240
–100...+100
☞,
Off...Tempo
–100...+100
L, 1:99...99:1, R
Dry, 1:99...99:1, Wet
☞,
Off...Tempo
–100...+100
Pitch Shift Mod - Pitch Shift / Depth
LFO Waveform=Triangle
Depth (+value)
Pitch Shift (+ value)
LFO Waveform=Square
Depth (–value)
40: Rotary SP
This effect simulates a rotary speaker, and obtains a more real-
istic sound by simulating the rotor in the low range and the
horn in the high range separately. The effect also simulates the
stereo microphone settings.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
+
Wet / Dry
Right
D
-mod
Mode Switch: Rotate/Stop
D
-mod
Speed Switch: Slow/Fast
D
-mod
Manual Speed Control
Wet / Dry
Mode (Mode Switch)
Switches between speaker rotation and stop
(Source)
Selects the modulation source that toggles between rotation and
a
stop
(Sw)
Selects switching mode of the modulation source that toggles
between rotation and stop
Speed (Speed Switch)
Switches the speaker rotation speed between slow and fast
(Source)
b
Selects the modulation source that toggles between slow and fast
Off, On
(Sw)
Selects switching mode of the modulation source that toggles
between slow and fast
H/R.Bal (Horn/Rotor Balance)
☞ Fx:09
Sets the level balance between the high-range horn and low-range
rotor
c
☞ Fx:09
ManuSp (Manual Speed Control)
Selects the modulation source in case the rotation speed is changed
1...16
directly
☞ Fx:09
Horn Accel (Horn Acceleration)
How quickly the horn rotation speed in the high range is switched
d
Ratio (Horn Ratio)
Adjusts the (high-range side) horn rotation speed. Standard value is
1.00. Selecting "Stop" will stop the rotation
Rotor Accel (Rotor Acceleration)
Determines how quickly the rotor rotation speed in the low range is
switched
e
Ratio (Rotor Ratio)
Adjusts the (low-range side) rotor rotation speed. Standard value is
1.00. Selecting "Stop" will stop the rotation
MicDistance
Sets the distance between the microphone and rotary speaker
f
Spread (Mic Spread)
Sets the angle of left and right microphones
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
(Source)
g
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
a: (Sw)
This parameter sets how the modulation source switches between
rotation and stop.
When "Sw" = Tggl (Toggle), the speaker rotates or stops alter-
nately each time you press the pedal.
Each time the value for the modulation source exceeds 64,
the speaker rotates or stops alternately.
(Rotary Speaker)
Horn
Rotary Speaker
Mic Distance
Horn/Rotor
Mic Spread
Balance
Rotor
Speaker Simulation
Rot, 1...99, Hrn
Stop, 0.50...2.00
Stop, 0.50...2.00
Dry, 1:99...99:1, Wet
Wet / Dry
Wet / Dry
Rotate, Stop
Off...Tempo
Tggl, Mmnt
Slow, Fast
Off...Tempo
Tggl, Mmnt
Off...Tempo
☞,
0...100
0...100
0...100
0...100
Off...Tempo
–100...+100

Advertisement

Table of Contents
loading

This manual is also suitable for:

Micro x

Table of Contents