Korg MICROX X50 Parameter Manual: Combination Mode; Combi Page Menu; Combi 0: Play; Combi (combination)

Music synthesizer and synthesizer/controller.
Hide thumbs

2. Combination mode

COMBI PAGE MENU
For details on how to select pages in Combination mode,
refer to p.1.
Play
0: Play Select and play combinations.
Select a program for each timbre, and
make, pan and level settings.
Select an arpeggio pattern and make
settings.
microX:
(☞p.33)
Tone Adjust
1: Ed–Tone Adjust Select the program used by each timbre.
Specify the pan and volume of each pro-
gram.
Use Tone Adjust to adjust parameters.
(☞p.38)
Track Parameter 2: Ed–Track Param MIDI, OSC, Pitch, delay, and scale set-
tings for each timbre. (☞p.40)
MIDI Filter 1
3: Ed–MIDI Filter1 MIDI message transmission/reception fil-
ter settings for each timbre, such as Prog
Change, JS, Ribbon and After Touch.
(☞p.42)
MIDI Filter 2
4: Ed–MIDI Filter 2 MIDI message transmission/reception fil-
ter settings for each timbre, such as
REALTIME CONTROL Knob, SW, and
Other Ctrl Change (☞p.44)
Key Zone
5: Ed–Key Zone Key zone settings for each timbre.
(☞p.45)
Velocity Zone
6: Ed–Vel Zone Velocity zone settings for each timbre.
(☞p.46)
Arp/Controls
7: Ed–Arp/Ctrls Arpeggiator settings. (Same as the 0:
Play parameters; can be edited from
either page.)
Controller settings. (☞p.47)
Insert Effect
8: Ed–InsertFX Bus and master effect send level settings
for each timbre.
Insert effect routing, selection, and set-
tings. (☞p.50)
Master Effect
9: Ed–MasterFX Master effect selection and settings.
Master EQ settings. (☞p.52)
Select an external control set.
COMBI 0: Play
In this display page you can select and play Combinations.
A Combi allows you to use up to 8 programs at one time.
0–1: Combi
(Combination)
X50
0–1a
0–1b
microX
0–1a
0–1b
0–1a: Bank, Combi Select, Category,
Cat.Hold, 10's Hold, (Tempo)
Bank (Bank Select)
This is the Combination bank display.
On this instrument, there are a total of 384 combination pro-
grams in three rewritable banks (A, B, C), each containing
128 combinations.
Bank A
Bank B
Preloaded combinations
Bank C
X50:
Use the front panel COMBI BANK [A]–[C] buttons to
select the bank.
microX:
Use the front panel COMBINATION [A]–[C] but-
tons to select the bank. If you press one of the COMBINA-
TION [A]–[C] buttons, you will automatically enter
Combination mode regardless of the mode in which you
were.
Combi Select (Combination Select)
Here you can select a combination. Choose this parameter,
and use one of the following methods to select a combina-
tion.
X50:
• Turn the [VALUE] dial.
• Use the [INC][DEC] buttons.
• Use the numeric buttons [0]–[9] to enter a program
number, and press the [ENTER] button to finalize the
number.
[Bank A...C]
[0...127: name]
33

Advertising

   Also See for Korg MICROX X50

   Related Manuals for Korg MICROX X50

This manual also for:

Micro x

Comments to this Manuals

Symbols: 0
Latest comments: