Chapter 7 Setup
>
7.4 Monitoring Setup
10
11
7.4.2
E-mail Notification Setup
If an error occurs in the ETERNUS DX60/DX80/DX90, the event (error information, etc.) is
reported to a specified address.
The procedure to set the E-mail notification is as follows:
Procedure
1
2
3
4
P3AM-3042-06ENZ0
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
After the necessary settings have completed, click the [Set] button.
A confirmation screen appears.
Click the [OK] button.
The specified event notification setting is enabled.
Start GUI.
Click [Setup E-Mail Notification] under the [Network Settings] menu on the
[Global Settings] tab in the GUI screen.
The [Setup E-Mail Notification] screen appears.
Set the necessary items in the [Notification E-Mail] area.
•
Select "Enable" in "Notification E-Mail".
•
Specify the E-mail destination address in "Destination E-Mail Address".
Figure 7.34 [Setup E-Mail Notification] screen (Notification E-Mail)
Click the "Mail Server Settings" link.
The [Mail Server Settings] screen appears.
172
End of procedure
Copyright 2010 FUJITSU LIMITED