Tilting Axis Adjustment (A) - Leica Viva TS16 User Manual

Next step
5.4
Description
Determination of
tilting axis error step-
by-step
60
OR
Select Redo to decline all measurements and to repeat all calibra-
tion runs.
OR
Back returns to the previous screen.
IF the results are
to be stored
to be determined again

Tilting Axis Adjustment (a)

This adjustment procedure determines the following instrument error:
Instrument error
a
The following table explains the most common settings.
Determine the horizontal collimation error (c) before starting this
☞
procedure.
1. Leica Captivate - Home: Settings\TS instrument\Check & adjust
2. Check & Adjust
Select the option: Check & adjust the tilting axis
3. Face I measurement
Aim the telescope accurately at
a target at about 100 m dis-
tance (or at least 20 m). The
target must be positioned at
least 27°/30 gon above or
beneath the horizontal plane.
THEN
If the Use status is set to Yes, Next over-
writes the old adjustment errors with the
new ones.
Redo rejects all new determined adjustment
errors and repeats the whole procedure.
Refer to paragraph
procedure step-by-step.
Description
Tilting-axis error
008373_001
Combined adjustment
+ 27°
- 27°
Check & Adjust