Figure 7-50 Low-Voltage Power Supply, Fan And Bracket; Rrp 47 24 Vdc Low-Voltage Power Supply, Fan And Bracket - Xerox Phaser 7700 Service Manual

RRP 47 24 VDC Low-voltage Power Supply, Fan and
Bracket

Figure 7-50 Low-voltage Power Supply, Fan and Bracket

Removal
1. Remove the rear cover and 24 VDC shield (RRP 11, on page 7-151).
2. Remove the Top Power Switch Cover, Left-Hand Power Switch and Left-Hand
Rear Mid Covers (RRP 6, on page 7-146).
Note If only the power supply needs to be removed, disconnect the
wiring harness and loosen the 2 screws that secure the power
supply to the PS mounting bracket.
3. Disconnect the wiring harness at P502, P505, and P2 from the 24 VDC power
supply and the fan motor wiring harness P214.
4. Remove the 1 screw at the top of the bracket and loosen the remaining four
screws in slots.
5. Remove the power supply and bracket assembly.
7-196 Phaser 7700 Color Laser Printer