RRP 6.6 Output Tray Full Sensor
See the Parts List on
Warning: Switch off the power and disconnect the Power Cord.
1.
Remove Tray 1.
2.
Remove the Left Interface Cover
3.
Remove the Top Cover Assembly
4.
Rotate the Output Tray Full Actuator away from the sensor.
5.
Disengage the five hooks securing the Output Tray Full Sensor to the Exit Chute
Assembly.
6.
Remove the sensor.
7.
Disconnect P/J311 from the sensor.
Exit Sensor
6-72
page
7-18.
(RRP 1.1 Left Interface Cover
(RRP 1.4 Top Cover Assembly
Phaser 4400 Laser Printer Service Manual
on page 6-6).
on page 6-9).