Optional Tray Registration/Feed Clutch - Xerox Phaser 3320 Service Manual

Optional Tray Registration/Feed Clutch

PL12.1.18, PL12.1.21
1. Lift printer from the optional Tray.
2. Remove the Dummy Front Cover (page 4-133).
3. Remove the Right Side Cover (page 4-135).
4. Remove 2 screws (silver, metal, hex-head, with flange, 7mm) and disengage tabs to remove the
Rear Cover.
5. Remove the Dummy Top Cover (page 4-133).
6. Remove 7 screws (silver, metal, 6 mm) and remove the right outside frame.
Xerox Internal Use Only Phaser 3320 and WorkCentre 3315/3325
Service Parts Disassembly
s3320-203
4-139
Service Manual