Table 200: Show Ipv6 Mtu - Display Description - Edge-Core ECS3510-28T Management Manual

This example displays a brief summary of IPv6 addresses configured on the
switch.
Console#show ipv6 interface brief
Interface
--------------- ---------- ---------- ------------------------------------
VLAN 1
VLAN 1
Console#
R
ELATED
show ip interface (1391)
This command displays the maximum transmission unit (MTU) cache for
show ipv6 mtu
destinations that have returned an ICMP packet-too-big message along
with an acceptable MTU to this switch.
C
OMMAND
Normal Exec, Privileged Exec
E
XAMPLE
The following example shows the MTU cache for this device:
Console#show ipv6 mtu
MTU
1400
1280
Console#

Table 200: show ipv6 mtu - display description

Field
MTU
Since
Destination
Address
* No information is displayed if an IPv6 address has not been assigned to the switch.
VLAN IPv6
Up Up
Up Up
C
OMMANDS
M
ODE
Since Destination Address
00:04:21 5000:1::3
00:04:50 FE80::203:A0FF:FED6:141D
Description
Adjusted MTU contained in the ICMP packet-too-big message returned from
this destination, and now used for all traffic sent along this path.
Time since an ICMP packet-too-big message was received from this
destination.
Address which sent an ICMP packet-too-big message.
– 1409 –
| IP Interface Commands
C 44
HAPTER
IPv6 Address
2001:DB8:2222:7273::72/96
FE80::2E0:CFF:FE00:FD%1/64
*
IPv6 Interface