Network-Access Link-Detection; Network-Access Link-Detection Link-Down - Edge-Core ES3528MV2 Management Manual

E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#network-access guest-vlan 25
Console(config-if)#
Use this command to enable link detection for the selected port. Use the
network-access
no form of this command to restore the default.
link-detection
S
YNTAX
D
EFAULT
Disabled
C
OMMAND
Interface Configuration
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#network-access link-detection
Console(config-if)#
Use this command to detect link-down events. When detected, the switch
network-access
can shut down the port, send an SNMP trap, or both. Use the no form of
link-detection
this command to disable this feature.
link-down
S
YNTAX
D
EFAULT
Disabled
C
OMMAND
Interface Configuration
[no] network-access link-detection
S
ETTING
M
ODE

network-access link-detection link-down

action [shutdown | trap | trap-and-shutdown]
no network-access link-detection
action - Response to take when port security is violated.
shutdown - Disable port only.
trap - Issue SNMP trap message only.
trap-and-shutdown - Issue SNMP trap message and disable
the port.
S
ETTING
M
ODE
– 885 –
| General Security Measures
C 25
HAPTER
Network Access (MAC Address Authentication)