Edge-Core ES3528MV2 Management Manual page 477

To show configured RMON alarms:
Click Administration, RMON.
1.
Select Configure Global from the Step list.
2.
Select Show from the Action list.
3.
Click Alarm.
4.
Figure 271: Showing Configured RMON Alarms
Use the Administration > RMON (Configure Global - Add - Event) page to
C
ONFIGURING
set the action to take when an alarm is triggered. The response can include
RMON E
VENTS
logging the alarm or sending a message to a trap manager. Alarms and
corresponding events provide a way of immediately responding to critical
network problems.
CLI R
"Remote Monitoring Commands" on page 795
◆
C
OMMAND
◆ If an alarm is already defined for an index, the entry must be deleted
before any changes can be made.
One default event is configured as follows:
◆
event Index = 1
P
ARAMETERS
These parameters are displayed:
◆ Index – Index to this entry. (Range: 1-65535)
EFERENCES
U
SAGE
Description: RMON_TRAP_LOG
Event type: log & trap
Event community name is public
Owner is RMON_SNMP
– 477 –
| Basic Administration Protocols
C 14
HAPTER
Remote Monitoring