Ipv6 Access-Group - Edge-Core ES3528MV2 Management Manual

| Access Control Lists
C 26
HAPTER
IPv6 ACLs

ipv6 access-group

This allows any packets sent to the destination 2009:DB9:2229::79/48
when the next header is 43."
Console(config-ext-ipv6-acl)#permit 2009:DB9:2229::79/48 next-header 43
Console(config-ext-ipv6-acl)#
R C
ELATED OMMANDS
access-list ipv6 (958)
Time Range (762)
This command binds a port to an IPv6 ACL. Use the no form to remove the
port.
S
YNTAX
ipv6 access-group acl-name {in | out}
[time-range time-range-name] [counter]
no ipv6 access-group acl-name {in | out}
acl-name – Name of the ACL. (Maximum length: 16 characters)
in – Indicates that this list applies to ingress packets.
out – Indicates that this list applies to egress packets.
time-range-name - Name of the time range.
(Range: 1-30 characters)
counter – Enables counter for ACL statistics.
D S
EFAULT ETTING
None
C M
OMMAND ODE
Interface Configuration (Ethernet)
C U
OMMAND SAGE
If a port is already bound to an ACL and you bind it to a different ACL, the
switch will replace the old binding with the new one.
E
XAMPLE
Console(config)#interface ethernet 1/2
Console(config-if)#ipv6 access-group standard david in
Console(config-if)#
R C
ELATED OMMANDS
show ipv6 access-list (963)
Time Range (762)
– 962 –