Disable - Edge-Core ES3528MV2 Management Manual

| General Commands
C 19
HAPTER

disable

reload
(Privileged Exec)
This command returns to Normal Exec mode from privileged mode. In
normal access mode, you can only display basic information on the switch's
configuration or Ethernet statistics. To gain access to all commands, you
must use the privileged mode. See
page 684.
D S
EFAULT ETTING
None
C M
OMMAND ODE
Privileged Exec
C U
OMMAND SAGE
The ">" character is appended to the end of the prompt to indicate that the
system is in normal access mode.
E
XAMPLE
Console#disable
Console>
R C
ELATED OMMANDS
enable (693)
This command restarts the system.
When the system is restarted, it will always run the Power-On Self-
N :
OTE
Test. It will also retain all configuration information stored in non-volatile
memory by the copy running-config startup-config command.
D S
EFAULT ETTING
None
C M
OMMAND ODE
Privileged Exec
C U
OMMAND SAGE
This command resets the entire system.
E
XAMPLE
This example shows how to reset the switch:
Console#reload
System will be restarted, continue <y/n>? y
– 696 –
"Understanding Command Modes" on