Show Interfaces Switchport - Edge-Core ES3528MV2 Management Manual

| Interface Commands
C 27
HAPTER
Interface Configuration
show interfaces
switchport
MAC Learning
Media Type
Current Status:
Link Status
Port Operation Status
Operation Speed-duplex : 100full
Up Time
Flow Control Type
Max Frame Size
MAC Learning Status
Console#
This command displays the administrative and operational status of the
specified interfaces.
S
YNTAX
show interfaces switchport [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
port-channel channel-id (Range: 1-12)
D S
EFAULT ETTING
Shows all interfaces.
C M
OMMAND ODE
Normal Exec, Privileged Exec
C U
OMMAND SAGE
If no interface is specified, information on all interfaces is displayed.
E
XAMPLE
This example shows the configuration setting for port 1.
Console#show interfaces switchport ethernet 1/1
Information of Eth 1/1
Broadcast Threshold
Multicast Threshold
Unknown Unicast Threshold
LACP Status
Ingress Rate Limit
Egress Rate Limit
VLAN Membership Mode
Ingress Rule
Acceptable Frame Type
Native VLAN
Priority for Untagged Traffic : 0
GVRP Status
Allowed VLAN
Forbidden VLAN
802.1Q Tunnel Status
– 988 –
: Enabled
: None
: Up
: Up
: 0w 0d 3h 18m 18s (11898 seconds)
: None
: 1518 bytes (1522 bytes for tagged frames)
: Enabled
: Enabled, 500 packets/second
: Disabled
: Disabled
: Disabled
: Disabled, 1000M bits per second
: Disabled, 1000M bits per second
: Hybrid
: Disabled
: All frames
: 1
: Disabled
: 1(u)
:
: Disabled