Ip Http Secure-Server - Edge-Core ES3528MV2 Management Manual

E
XAMPLE
Console(config)#ip http secure-port 1000
Console(config)#
R
ELATED

ip http secure-server (835)

show system (713)
This command enables the secure hypertext transfer protocol (HTTPS) over
ip http
the Secure Socket Layer (SSL), providing secure access (i.e., an encrypted
secure-server
connection) to the switch's web interface. Use the no form to disable this
function.
S
YNTAX
[no] ip http secure-server
D
EFAULT
Enabled
C
OMMAND
Global Configuration
C
OMMAND
Both HTTP and HTTPS service can be enabled independently on the
◆
switch. However, you cannot configure the HTTP and HTTPS servers to
use the same UDP port.
If you enable HTTPS, you must indicate this in the URL that you specify
◆
in your browser: https://device[:port_number]
When you start HTTPS, the connection is established in this way:
◆
■
■
■
The client and server establish a secure encrypted connection.
◆
A padlock icon should appear in the status bar for Internet Explorer 6,
Mozilla Firefox 4, or Google Chrome 29, or more recent versions.
C
OMMANDS
S
ETTING
M
ODE
U
SAGE
The client authenticates the server using the server's digital
certificate.
The client and server negotiate a set of security protocols to use for
the connection.
The client and server generate session keys for encrypting and
decrypting data.
– 835 –
| Authentication Commands
C 24
HAPTER
Web Server