Efm Oam Link-Monitor Frame Threshold - Edge-Core ES3528MV2 Management Manual

| OAM Commands
C 42
HAPTER
efm oam
link-monitor
frame threshold
efm oam
link-monitor
frame window
This command sets the threshold for errored frame link events. Use the no
form to restore the default setting.
S
YNTAX
efm oam link-monitor frame threshold count
no efm oam link-monitor frame threshold
count - The threshold for errored frame link events.
(Range: 1-65535)
D S
EFAULT ETTING
1
C M
OMMAND ODE
Interface Configuration
C U
OMMAND SAGE
If this feature is enabled, an event notification message is sent if the
threshold is reached or exceeded within the period specified by the
oam link-monitor frame window
Frame Event TLV includes the number of errored frames detected during
the specified period.
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#efm oam link-monitor frame threshold 5
Console(config-if)#
This command sets the monitor period for errored frame link events. Use
the no form to restore the default setting.
S
YNTAX
efm oam link-monitor frame window size
no efm oam link-monitor frame window
size - The period of time in which to check the reporting threshold
for errored frame link events. (Range: 10-65535 units of 10
milliseconds)
D S
EFAULT ETTING
10 (units of 100 milliseconds) = 1 second
C M
OMMAND ODE
Interface Configuration
C U
OMMAND SAGE
If this feature is enabled, an event notification message is sent if the
threshold specified by the
– 1364 –
command (page

efm oam link-monitor frame threshold

efm
1364). The Errored
command