show startup-config
show system
line console
!
line vty
!
end
!
Console#
R
C
ELATED
OMMANDS
show startup-config (713)
This command displays the configuration file stored in non-volatile memory
that is used to start up the system.
C
M
OMMAND
ODE
Privileged Exec
C
U
OMMAND
SAGE
Use this command in conjunction with the show running-config
◆
command to compare the information in running memory to the
information stored in non-volatile memory.
This command displays settings for key command modes. Each mode
◆
group is separated by "!" symbols, and includes the configuration mode
command, and corresponding commands. This command displays the
following information:
MAC address for the switch
■
SNMP community strings
■
SNMP trap authentication
■
Users (names and access levels)
■
VLAN database (VLAN ID, name and state)
■
Multiple spanning tree instances (name and interfaces)
■
Interface settings and VLAN configuration settings for each interface
■
IP address for management VLAN
■
Any configured settings for the console port and Telnet
■
E
XAMPLE
Refer to the example for the running configuration file.
R
C
ELATED
OMMANDS
show running-config (711)
This command displays system information.
D
S
EFAULT
ETTING
None
C
M
OMMAND
ODE
Normal Exec, Privileged Exec
– 713 –
| System Management Commands
C
20
HAPTER
System Status