Dot1X Port-Control - Edge-Core ES3528MV2 Management Manual

E
This command sets the dot1x mode on a port interface. Use the no form to

dot1x port-control

restore the default.
S
D
force-authorized
C
Interface Configuration
E
This command enables periodic re-authentication for a specified port. Use
dot1x
the no form to disable re-authentication.
re-authentication
S
C
Interface Configuration
C
◆
XAMPLE
Console(config)#interface eth 1/2
Console(config-if)#dot1x operation-mode multi-host max-count 10
Console(config-if)#
YNTAX
dot1x port-control {auto | force-authorized |
force-unauthorized}
no dot1x port-control
auto – Requires a dot1x-aware connected client to be authorized by
the RADIUS server. Clients that are not dot1x-aware will be denied
access.
force-authorized – Configures the port to grant access to all
clients, either dot1x-aware or otherwise.
force-unauthorized – Configures the port to deny access to all
clients, either dot1x-aware or otherwise.
EFAULT
M
OMMAND ODE
XAMPLE
Console(config)#interface eth 1/2
Console(config-if)#dot1x port-control auto
Console(config-if)#
YNTAX
[no] dot1x re-authentication
M
OMMAND ODE
U
OMMAND SAGE
The re-authentication process verifies the connected client's user ID
and password on the RADIUS server. During re-authentication, the
client remains connected the network and the process is handled
– 853 –
| Authentication Commands
C 24
HAPTER
802.1X Port Authentication