Auto-Traffic-Control Alarm-Fire-Threshold - Edge-Core ES3528MV2 Management Manual

| Congestion Control Commands
C 30
HAPTER
Automatic Traffic Control Commands
auto-traffic-control
alarm-fire-threshold
E
XAMPLE
This example sets the clear threshold for automatic storm control for
broadcast traffic on port 1.
Console(config)#interface ethernet 1/1
Console(config-if)#auto-traffic-control broadcast alarm-clear-threshold 155
Console(config-if)#
This command sets the upper threshold for ingress traffic beyond which a
storm control response is triggered after the apply timer expires. Use the
no form to restore the default setting.
S
YNTAX
auto-traffic-control {broadcast | multicast} alarm-fire-
threshold threshold
no auto-traffic-control {broadcast | multicast} alarm-fire-
threshold
broadcast - Specifies automatic storm control for broadcast traffic.
multicast - Specifies automatic storm control for multicast traffic.
threshold - The upper threshold for ingress traffic beyond which a
storm control response is triggered after the apply timer expires.
(Range: 1-255 kilo-packets per second)
D S
EFAULT ETTING
128 kilo-packets per second
C M
OMMAND ODE
Interface Configuration (Ethernet)
C U
OMMAND SAGE
Once the upper threshold is exceeded, a trap message may be sent if
◆
configured by the snmp-server enable port-traps atc broadcast-alarm-
fire command or snmp-server enable port-traps atc multicast-alarm-
fire command.
◆ After the upper threshold is exceeded, the control timer must first
expire as configured by the
before a control response is triggered if configured by the
control action command.
E
XAMPLE
This example sets the trigger threshold for automatic storm control for
broadcast traffic on port 1.
Console(config)#interface ethernet 1/1
Console(config-if)#auto-traffic-control broadcast alarm-fire-threshold 255
Console(config-if)#
– 1038 –
auto-traffic-control apply-timer command
auto-traffic-