Radius Client; Radius-Server Acct-Port; Table 74: Radius Client Commands - Edge-Core ES3528MV2 Management Manual

| Authentication Commands
C 24
HAPTER

RADIUS Client

RADIUS C
LIENT
radius-server
acct-port
Remote Authentication Dial-in User Service (RADIUS) is a logon
authentication protocol that uses software running on a central server to
control access to RADIUS-aware devices on the network. An authentication
server contains a database of multiple user name/password pairs with
associated privilege levels for each user or group that require management
access to a switch.

Table 74: RADIUS Client Commands

Command Function

radius-server acct-port

Sets the RADIUS server network port
radius-server auth-port Sets the RADIUS server network port
radius-server host Specifies the RADIUS server
radius-server key Sets the RADIUS encryption key
radius-server retransmit Sets the number of retries
radius-server timeout Sets the interval between sending authentication
requests
show radius-server Shows the current RADIUS settings
This command sets the RADIUS server network port for accounting
messages. Use the no form to restore the default.
S
YNTAX
radius-server acct-port port-number
no radius-server acct-port
port-number - RADIUS server UDP port used for accounting
messages. (Range: 1-65535)
D S
EFAULT ETTING
1813
C M
OMMAND ODE
Global Configuration
E
XAMPLE
Console(config)#radius-server acct-port 181
Console(config)#
– 816 –
Mode
GC
GC
GC
GC
GC
GC
PE