Table 26: Chassis Id Subtype - Edge-Core ES3528MV2 Management Manual

| Basic Administration Protocols
C 14
HAPTER
Link Layer Discovery Protocol
D LLDP
ISPLAYING
L D
OCAL EVICE
I
NFORMATION
Figure 238: Configuring the Civic Address for an LLDP Interface
Use the Administration > LLDP (Show Local Device Information) page to
display information about the switch, such as its MAC address, chassis ID,
management IP address, and port information.
CLI R
EFERENCES
"show lldp info local-device" on page 1314
◆
P
ARAMETERS
These parameters are displayed:
Global Settings
◆ Chassis Type – Identifies the chassis containing the IEEE 802 LAN
entity associated with the transmitting LLDP agent. There are several
ways in which a chassis may be identified and a chassis ID subtype is
used to indicate the type of component being referenced by the chassis
ID field.

Table 26: Chassis ID Subtype

ID Basis
Chassis component
Interface alias
Port component
MAC address
Network address
Interface name
Locally assigned
Chassis ID – An octet string indicating the specific identifier for the
◆
particular chassis in this system.
System Name – A string that indicates the system's administratively
◆
assigned name (see
– 432 –
Reference
EntPhysicalAlias when entPhysClass has a value of 'chassis(3)'
(IETF RFC 2737)
IfAlias (IETF RFC 2863)
EntPhysicalAlias when entPhysicalClass has a value 'port(10)' or
'backplane(4)' (IETF RFC 2737)
MAC address (IEEE Std 802-2001)
networkAddress
ifName (IETF RFC 2863)
locally assigned
"Displaying System Information" on page 117).