Show Ip Access-Group - Edge-Core ES3528MV2 Management Manual

show ip
access-group
show ip access-list
C M
OMMAND ODE
Interface Configuration (Ethernet)
C U
OMMAND SAGE
If an ACL is already bound to a port and you bind a different ACL to it, the
switch will replace the old binding with the new one.
E
XAMPLE
Console(config)#int eth 1/2
Console(config-if)#ip access-group david in
Console(config-if)#
R C
ELATED OMMANDS
show ip access-list (957)
Time Range (762)
This command shows the ports assigned to IP ACLs.
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#show ip access-group
Interface ethernet 1/2
IP access-list david in
Console#
R C
ELATED OMMANDS
ip access-group (956)
This command displays the rules for configured IPv4 ACLs.
S
YNTAX
show ip access-list {standard | extended} [acl-name]
standard – Specifies a standard IP ACL.
extended – Specifies an extended IP ACL.
acl-name – Name of the ACL. (Maximum length: 16 characters)
C M
OMMAND ODE
Privileged Exec
– 957 –
| Access Control Lists
C 26
HAPTER
IPv4 ACLs