| Basic Administration Protocols
C
14
HAPTER
Link Layer Discovery Protocol
D
LLDP
ISPLAYING
R
D
EMOTE
EVICE
I
NFORMATION
Use the Administration > LLDP (Show Remote Device Information) page to
display information about devices connected directly to the switch's ports
which are advertising information through LLDP, or to display detailed
information about an LLDP-enabled device connected to a specific port on
the local switch.
CLI R
EFERENCES
"show lldp info remote-device" on page 1315
◆
P
ARAMETERS
These parameters are displayed:
Port
Local Port – The local port to which a remote LLDP-capable device is
◆
attached.
◆
Chassis ID – An octet string indicating the specific identifier for the
particular chassis in this system.
◆
Port ID – A string that contains the specific identifier for the port from
which this LLDPDU was transmitted.
System Name – A string that indicates the system's administratively
◆
assigned name.
Port Details
◆
Port – Port identifier on local switch.
Remote Index – Index of remote device attached to this port.
◆
Local Port – The local port to which a remote LLDP-capable device is
◆
attached.
Chassis Type – Identifies the chassis containing the IEEE 802 LAN
◆
entity associated with the transmitting LLDP agent. There are several
ways in which a chassis may be identified and a chassis ID subtype is
used to indicate the type of component being referenced by the chassis
ID field. (See
Table 26, "Chassis ID Subtype," on page
Chassis ID – An octet string indicating the specific identifier for the
◆
particular chassis in this system.
◆
System Name – A string that indicates the system's assigned name.
System Description – A textual description of the network entity.
◆
Port Type – Indicates the basis for the identifier that is listed in the
◆
Port ID field. See
Table 28, "Port ID Subtype," on page
Port Description – A string that indicates the port's description. If RFC
◆
2863 is implemented, the ifDescr object should be used for this field.
– 436 –
432.)
434.