Show Network-Access - Edge-Core ES3528MV2 Management Manual

Use this command to display the MAC authentication settings for port
show
interfaces.
network-access
S
YNTAX
D
EFAULT
Displays the settings for all interfaces.
C
OMMAND
Privileged Exec
E
XAMPLE
Console#show network-access interface ethernet 1/1
Global secure port information
Reauthentication Time
MAC Address Aging
Port : 1/1
MAC Authentication
MAC Authentication Intrusion Action
MAC Authentication Maximum MAC Counts : 1024
Maximum MAC Counts
Dynamic VLAN Assignment
Dynamic QoS Assignment
MAC Filter ID
Guest VLAN
Link Detection
Detection Mode
Detection Action
Console#
show network-access [interface interface]
interface - Specifies a port interface.
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
S
ETTING
M
ODE
– 891 –
| General Security Measures
C 25
HAPTER
Network Access (MAC Address Authentication)
: 1800
: Disabled
: Disabled
: Block traffic
: 1024
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Link-down
: Trap